Baltimore, MD's Skilled Basement & Crawl Space Services

A concerned homeowner reached out to our team at Basement Systems. Her crawl space was damp and lacking of insulation. With winter weather fast-approaching, it is important to ensure your crawl space is protected and properly insulated. Our team encapsulated the crawl space with our trusted CleanSpace vapor barrier system, along with lining the walls with our patented SilverGlo insulation. Attached is a photo of the homeowner alongside our foreman INSIDE the crawl space itself!

This homeowner in Baltimore reached out to our team with concerns of water seepage in his basement. Our team solved this issue by installing our trusted WaterGuard drainage system along the perimeter of the basement, connecting into a new TripleSafe sump pump system. The walls were also lined in CleanSpace vapor barrier wall system. Attached is a photo of our festive foreman next to the satisfied homeowner!

This homeowner was looking to get his basement finished, and turned into a comfortable recreational area. Our team was able to do just that! Attached is a photo of the satisfied homeowner alongside our foreman, Chris.

This homeowner reached out to our team with concerns of her partially-finished basement. Although she had a sump pump, it was not working well, causing leaks and moisture to invade her basement. Our team acted fast, and replaced the sump pump with our award-winning SuperSump system! Attached is a photo of the homeowner after the installation, alongside our foreman!

This homeowner recently reached out to our team at Basement Systems with concerns about her crawl space. Floors throughout her home above the crawl space began to sag. Our team swooped in and installed a supplemental beam under the home to better support the foundation. Attached is a photo of the satisfied homeowner alongside our trusted foreman, Zak!

We recently had the pleasure of helping a homeowner in Baltimore, who started noticing that with every rain, water was beginning to seep into her basement. She reached out to us, understandably concerned about the potential damage this moisture could cause to her home’s foundation and the overall safety. A System Design Specialist from our team visited the homeowner, identified the causes of the water intrusion, and recommended the installation of our WaterGuard system. The WaterGuard system is a revolutionary interior basement waterproofing solution designed to effectively capture wall and floor seepage before it damages your basement or crawl space. With the homeowner's go-ahead, our foreman and installation team got to work. We meticulously installed WaterGuard along the perimeter of the basement floor. This involved carefully creating a drainage channel, ensuring it was expertly positioned to catch any water entering the space and divert it away from the property, thus preserving the fitness and livability of the area. The result? A fully waterproofed basement and most importantly, a greatly relieved homeowner. 

This customer originally reached out to our team with concerns about water seepage in his basement. Water would intrude through 2 of the 4 walls, raising the risk of damage to personal belongings and the risk of mold growth! Our team remedied this issue by installing our trusted WaterGuard drainage system along the footer of the basement foundation, leading into our SuperSump pump system. Here is a photo of the satisfied homeowner alongside our dedicated Foreman, Esteban!

Recently, we tackled a challenging waterproofing project in Baltimore, MD. The homeowner reached out to us after a routine inspection uncovered several red flags – key among them being structural concerns and substantial moisture in the basement's sidewalls. This was particularly tricky as the basement was finished, which heightened the risk of long-term damage and added complexity to the solution process. On receiving the call, we promptly dispatched our specialist system design team to conduct a thorough analysis. Their inspection was meticulous, resulting in a tailored waterproofing strategy that promised not just to rectify the current issues but also prevent future occurrences. Our chosen plan hinged on two of our most reliable products: WaterGuard and CleanSpace. WaterGuard, an innovative interior drainage system, was to be positioned along the basement's perimeter. Its design would capture wall and floor seam water, channeling it away before it ever became a problem. Coinciding with this, CleanSpace, a durable, moisture-resistant liner, was to envelop the problem areas on the basement walls. Together, these solutions provide a barrier to moisture and redirect any water ingress effectively. Our dedicated production team worked meticulously, ensuring every aspect of the solution was implemented seamlessly. 

Recently, a homeowner in Baltimore, MD, reached out to us with a concerning issue. They noticed water seeping up through their basement floor, especially around a visible exterior crack. Aware of how serious water damage can be, they knew it was time to call in experts. One of our System Design Specialists visited the home for a thorough inspection. We found that the issue was indeed as serious as the homeowner feared but, fortunately, well within our capability to fix. The solution was clear: we needed to install our WaterGuard system alongside the TripleSafe Sump Pump. Our WaterGuard system is specifically designed to intercept water at the perimeter of the basement and direct it safely away to prevent any damage or flooding. Paired with the TripleSafe Sump Pump, which offers triple the protection against water by having primary, secondary pumps, and a battery backup system, we had a winning combination that would ensure the basement stayed dry, regardless of heavy rain or other contributing factors. Our experienced installers got to work, carefully integrating these systems without disrupting the homeowner's daily life more than necessary. The installation process went smoothly, thanks to our team's expertise and the straightforward efficiency of the products we trust. 

When a homeowner in Baltimore, MD, noticed their unfinished basement began experiencing water intrusion and their first level was slightly sagging at one end, they knew immediate action was needed. Concerned about the visible deterioration of the brickwork in their crawlspace, which was unable to support that area properly, they reached out to Basement Systems for help. Understanding the urgency, our team quickly got to work to provide a lasting solution. After contacting our Customer Care team, an appointment was scheduled for an in-depth home inspection. Our System Design Specialist meticulously assessed the situation, determining the best course of action to address both the water issue and the structural instability. Therefore, we recommended the installation of the SmartJack system — a proven, reliable method for stabilizing and lifting sagging floors back to their original position. Our production team, consisting of a skilled foreman and knowledgeable installers, arrived at the home to tackle the problem. The process began with carefully preparing the area in the crawlspace. We then installed the SmartJack support system, which involved strategically placing high-strength steel supports to ensure a durable and lasting lift to the compromised end of the home. 

We recently had the opportunity to assist a family in Baltimore, MD, who were experiencing a restless issue with their home. The problem lay hidden beneath their feet; the first floor of their living space developed an unsettling condition. Parts of the floor felt as if you were "walking on a trampoline" rather than the solid foundation you’d expect in a home. Upon receiving the call, our team swung into action with our process. Following a chat with our Customer Care team, the homeowners were visited by one of our keen-eyed System Design Specialists. They conducted a thorough inspection, pinpointing the root of the floored concern as weak support under the home, compromising safety and comfort. Our recommendation? The SmartJack system - a strong, adjustable solution designed specifically for tasks like these, restoring stability and peace of mind. Fast forward to installation day, our expert crew, led by a seasoned foreman and equipped with the SmartJack system, set to work in the crawl space under the sagging floors. The workings of SmartJack lies in its design to not just offer a quick fix but ensure lasting rectification by supporting and stabilizing the unsettled floors from beneath.

This homeowner recently faced the challenge of water entering their basement with every hard rain. Situated at the end of a row of townhomes, they were worried that hairline cracks in the foundation might be the culprits. Understanding the potential damage and stress this issue could cause, they reached out to us to find a viable, lasting solution. Once contacted, our Customer Care team quickly set up an appointment for a thorough home inspection. A knowledgeable System Design Specialist from our Sales team visited the home, diagnosing the problem in detail. It was indeed the minor cracks along with ground water pressure that led to water in the basement. To address this issue decisively, we recommended the installation of our tried-and-tested WaterGuard basement waterproofing system alongside the SuperSump sump pump system. These solutions are designed not only to effectively handle such water problems but also to ensure a durable protection against future occurrences. Our installation crew, comprising a dedicated foreman and proficient installers, carried out the work diligently. The WaterGuard system was expertly installed at the basement's perimeter to intercept water, directing it efficiently to the newly installed SuperSump. This combination is most effective in ensuring the basement remains dry and comfortable, rain or shine. 

Recently, we tackled a unique challenge for a homeowner in Baltimore, MD, whose finished basement was marred by a persistent leak. Every time heavy rains hit, a specific spot on the back wall would become a source of ingress for water, threatening the space of ease and entertainment they had carefully created. Understandably concerned about potential damage and the wellbeing of their home, they reached out to us, seeking a dependable solution. Upon assessment, our skilled System Design Specialist presented a tailored solution including the installation of our adept WaterGuard system alongside the robust SuperSump pump. The proposed plan aimed not just to arrest the issue temporarily but give a long-term, reliable shield against future water intrusion. Addressing the job with proficiency, our production team, including experienced foremen and installers, set to work with thoroughness. Installed with minimal disruption to the homeowner's daily life, the WaterGuard system effectively intercepted water at the entry point, channeling it towards the SuperSump pump, which then safely expelled it from the basement. 

In Baltimore, Maryland, a concerned homeowner reached out to us about a persistent issue with water seeping into his finished basement during rainy weather. The water would trickle in where the walls meet the floor, creating an uncomfortable and potentially damaging situation. Recognizing the need for a permanent solution, Basement Systems USA stepped in for a thorough evaluation. Upon inspection, our team confirmed that water was indeed intruding along the perimeter of the basement. To address this, we recommended installing our WaterGuard system—a drainage solution specifically designed to capture water at the critical joint where the wall and floor meet, effectively directing it away before it could reach the basement interior.   

The WaterGuard system was carefully installed along the basement's perimeter, ensuring a seamless fit with the homeowner's existing finishes. This solution provided the homeowner with peace of mind, knowing his basement was protected against future water issues. He was genuinely satisfied with the final result, expressing gratitude for a solution that not only addressed his immediate concerns but also safeguarded his home for the long term.

When a Baltimore, MD homeowner reached out to Basement Systems USA, they were deeply concerned about water entering their basement through their stone foundation. They had also noticed troubling cracks and a bowing wall, which threatened the structural integrity of their home. After conducting a thorough inspection, our team determined the best solution was to install a Wally system, designed to reinforce failing foundation walls and prevent future water intrusion. We paired this with a helical pier assembly to stabilize the structure and ensure long-term safety. These comprehensive repairs restored the foundation's stability, giving the homeowner peace of mind and a dry, secure basement.

Recently, we had the pleasure of helping a homeowner in Baltimore, MD, tackle a problem that many face – semi-regular water seepage in their partially finished basement. This typically occurred after prolonged periods of heavy rain, turning what should be a functional space into a source of stress and inconvenience. Understanding the urgency and frustration behind the call, our Customer Care team quickly set an appointment for a home inspection. A System Design Specialist from our Sales Team conducted a thorough check of the space. It was clear that a reliable solution was needed to keep the basement dry, comfortable, and most importantly, usable year-round. The recommended approach was to install our WaterGuard system alongside the powerful SuperSump pump. The WaterGuard system is designed to intercept water at the perimeter of the basement, directing it away from the living space, while the SuperSump sump pump efficiently removes any captured water from the basement, keeping it dry and clean. Our production team, consisting of our dedicated installers, got to work. The installation was smooth, ensuring minimal disruption to the homeowner's daily life. 

Recently, we had a homeowner in Baltimore reach out to us with a familiar problem - water was making its uninvited way into their partially finished basement during heavy rains, seeping through a few cracks in the walls. Understanding how stressful and damaging water can be to a home, our team was ready to jump into action and provide a lasting solution to this nagging issue. Following our process, we began with a thorough home inspection. Our System Design Specialist examined the basement, identifying the key areas where water was infiltrating and threatening the integrity and comfort of the homeowner's space. It was clear that a robust, reliable solution was needed, and that's exactly what we proposed - the installation of our WaterGuard system alongside the reliable TripleSafe Sump Pump. The WaterGuard system is ingeniously designed to intercept water at the basement perimeter, guiding it efficiently away from the home's foundation. Complementing this, the TripleSafe Sump Pump offers triple the protection, ensuring that even in the event of a malfunction or excessive water inflow, the basement remains dry and secure. Our skilled production team, comprising of diligent installers, mobilized to make this recommendation a reality. After carefully preparing the area to ensure a seamless installation, we put the WaterGuard system in place around the perimeter and positioned the TripleSafe Sump Pump strategically for optimal water management. 

Recently, our Basement Systems team in Baltimore had the opportunity to help a homeowner with a rather troubling issue. They discovered a significant crack in their foundation near the basement door, stretching from the top of the door to the floor. Not only was it a structural concern, but it also allowed water to invade their basement, particularly disturbing during localized downpours. Upon contacting us, our Customer Care team quickly scheduled a home inspection to assess the situation. One of our diligent System Design Specialists was on-site to provide a thorough assessment. After diagnosing the problem, we recommended a dual-action solution: the installation of our WaterGuard system and a TripleSafe Sump Pump. This combination promised not just to address the immediate water invasion issue but also to secure the basement against future water-related threats. Our seasoned production team, featuring skilled foreman and installers, set to work. The WaterGuard system was strategically placed around the perimeter to capture any invading water, redirecting it to our TripleSafe Sump Pump. This pump is designed for optimal efficiency, equipped to handle high water volumes, ensuring the homeowner's basement remains dry under any circumstances. 

At Basement Systems, we recently had the privilege of assisting a Baltimore homeowner with a challenging yet fairly common issue. Having invested in finishing their basement for added living space, they were dismayed when they discovered water intrusion whenever it rained, prompting them to remove the bottom half of the affected drywall. This didn’t solve the underlying problem, and that's when they reached out to us for a lasting solution. Our first step was to schedule a detailed home inspection. A System Design Specialist from our team visited the home, carefully reviewed the situation, and identified the root cause of the water intrusion. Based on this thorough evaluation, we recommended a combination of our WaterGuard drainage system and the TripleSafe Sump Pump as the best course of action to resolve the water problems permanently. The solution involved installing the WaterGuard along the perimeter of the basement floor to effectively capture and redirect water before it could enter the living space. The TripleSafe Sump Pump system was then put in place to ensure that any water collected would be efficiently pumped out and away from the home, even in the case of heavy rainfall or a power outage. Our production team, comprising a skilled foreman and highly trained installers, meticulously carried out the installation, transforming a repeat frustration for this homeowner into a worry-free, dry, and usable space. 

Recently, we had the pleasure of helping a homeowner in Baltimore, MD, who was troubled by water seeping into her basement with each rainfall. The intrusion around the sewer pipe, although not leaking from the pipe itself, posed a significant concern for her home's integrity and health. Upon receiving her call, our dedicated Customer Care team promptly scheduled a home inspection. Our System Design Specialist then conducted a thorough examination, pinpointing the problem areas with precision. Understanding her frustration, we recommended a tailored solution to her issue – the installation of our trusty WaterGuard flooring system along with our robust TripleSafe Sump Pump. 

Located in Baltimore, MD, a 100-year-old home faced a pressing issue. Following a series of significant rainstorms, the homeowner discovered water leaking into their basement. Upon inspection, our specialist accurately diagnosed the problem and recommended a comprehensive solution to ensure a watertight basement. Our solution involved the installation of three key systems: waterguard, TripleSafe sump pump, and SaniDry Sedona. The WaterGuard system was installed along the interior perimeter of the basement to effectively capture wall and floor seepage before it reaches the basement floor. The TripleSafe sump pump, with its three pump design, ensures that the basement stays dry all the time, even in cases of power outages or extreme flood conditions. Lastly, the SaniDry Sedona was put in place to keep the air dry and healthy, combating mold and mildew growth and ensuring the air quality was pristine. 

Recently, we had the pleasure of working with a Baltimore, MD homeowner who was wrestling with persistent dampness in their basement whenever it rained. Living in an old house with a stone foundation comes with its unique set of challenges, and for them, a wet basement was an unwelcome companion that seemed impossible to shake off. Understanding the need for a reliable and long-lasting solution, they reached out to us at Basement Systems. Our System Design Specialist visited the home, examining the signs of dampness closely, and identified that the leakage was due to an outdated draining system that simply couldn't keep up with the heavy rainfall. The solution we suggested was twofold: the installation of a WaterGuard drainage system and a TripleSafe Sump Pump. WaterGuard is specially designed for this scenario, sitting at the perimeter of the basement to catch any intruding water before it reaches the middle of the floor. Paired with the TripleSafe Sump Pump, which offers three levels of protection for extra peace of mind, this duo was determined to be the perfect remedy for their water woes. 

When one Baltimore homeowner discovered water seeping through their unfinished basement walls every time it rained, they decided they'd had enough. Tired of the mess and potential damage, they reached out to us at Basement Systems for a reliable solution. Recognizing the urgency of their situation, we promptly scheduled a home inspection to address their concerns. Our System Design Specialist soon visited the homeowner, meticulously examining the basement to understand the root cause of the water intrusion. After a thorough evaluation, it was clear that the best solution involved the installation of our WaterGuard drainage system and the SuperSump sump pump system. These solutions are designed not only to effectively channel water away from the basement but also to ensure the space remains dry and usable for years to come. 

Recently, we had the opportunity to work with a homeowner from Baltimore, MD, who reached out concerned about a moist dilemma that was creeping up in their partially finished basement. Though a portion behind their water heater seemed to gather most of the unwanted moisture, worries grew that this damp nuisance might be inching its way to their finished areas. Once at the home, our specialist conducted a thorough inspection and concluded that the ideal remedy would involve our unparalleled WaterGuard interior drainage system combined with the robust safeguarding capabilities of the TripleSafe Sump Pump. 

Recently, we encountered a homeowner in Baltimore, MD, facing a common yet unsettling issue – their kitchen floor appeared to be sinking, leading back to concerns about their crawl space. Digging into the problem, we discovered the root cause; the home’s dirt-floor crawlspace was compromising the structure's integrity. Understanding the homeowner’s urgency, our Customer Care team quickly set an appointment for an in-home inspection. Our System Design Specialist was on the scene, conducting a comprehensive evaluation of the space. The diagnosis was clear: the sinking kitchen floor was a symptom of deeper structural issues within the crawlspace. To address these concerns, we recommended a two-pronged solution: CleanSpace and SmartJack. The CleanSpace system was designed to encapsulate the crawlspace, transforming it into a dry, clean, and energy-efficient area. Meanwhile, the SmartJack system offered a solid solution to stabilize and gradually lift the sagging kitchen floor back to its original position. 

When a property owner in Baltimore, MD reached out to us with concerns about water seeping into their basement especially after heavy rains, it was clear they needed an effective solution that would stand the test of time. They were worried about the potential damage this could cause to their home and belongings. Understanding their concerns, we jumped into action to address their water woes comprehensively. Following our streamlined process, our System Design Specialist performed a thorough inspection of their basement. It was determined that the best course of action to permanently solve their wet basement issue was to install our trustworthy trio: the WaterGuard interior drainage system, our reliable SuperSump sump pump, and the protective CleanSpace wall system. The WaterGuard system was strategically installed along the basement's perimeter; it’s ingeniously designed to capture wall and floor joint leakages, directing the water efficiently to the SuperSump sump pump. The SuperSump then takes over, efficiently ejecting the collected water away from the home, ensuring the basement remains dry.

Recently, a homeowner in Baltimore, MD reached out to us at Basement Systems USA with a proactive mindset. Their goal was twofold: protect their basement from water damage and eventually transform it into a livable area. After careful inspection, our specialist recommended the installation of our WaterGuard drainage system, our reliable SuperSump pump, and our SaniDry Sedona dehumidifier to ensure the basement would not only stay dry but also become a healthy and comfortable living space. Our production team, consisting of experienced foreman and installers, got to work, efficiently installing the WaterGuard around the perimeter of the basement to intercept water, the SuperSump pump system to evacuate the intercepted water, and the SaniDry Sedona to control the humidity level in the basement. 

In Baltimore, a homeowner with an investment property was dealing with a common but frustrating issue. Every time it rained, water made its way through the walls of their unfinished basement. Understanding the unique needs of this house, we first had our Customer Care team schedule an inspection to find the best solution for this home. During the visit, our System Design Specialist took a look at the basement, identifying the main sources of water entry and the best ways to address them. The tailored solution? Installation of our proven WaterGuard system along with the robust SuperSump pump. The WaterGuard system, designed to intercept water at the basement perimeter, was strategically installed to capture water and direct it away from the foundation. Additionally, the SuperSump pump system was fitted to effectively pump out any water collected, creating a much drier basement environment. 

When a homeowner in Baltimore, MD, reached out to us about an ongoing challenge with their basement. Each time it rained, the tenant reported an increasing amount of water pooling in the basement. Not only did this issue pose a risk to the property’s structure, but it also jeopardized the comfort and safety of its inhabitants. Our solution? Installing a robust WaterGuard system along with a SuperSump sump pump. The WaterGuard system was designed to intercept water at the perimeter of the basement, quietly channeling it away before it ever reached the floors or walls. 

When the rains in Baltimore, MD, decided to test the limits of one homeowner’s patience by allowing water to sneak through their basement walls, it was clear that ignoring it wasn't an option anymore. Even minor leaks can turn major when left unattended. With a problem identified, we recommended a straightforward, yet powerful solution: CleanSpace installation. CleanSpace is our heavy-duty, waterproof liner, designed not only to keep water out but also to significantly improve the overall air quality and energy efficiency of the space it’s installed in. 

After a series of storms hit Baltimore, MD, we had a homeowner reach out to us. Their finished basement had a soaked carpet! Pulling back the carpet revealed water seeping in. We conducted a thorough inspection, pinpointing how and where the water was making its entrance. Understanding the extent of the issue allowed us to provide a tailored solution designed to keep the basement dry and cozy once more. Our recommendation? A duo of our best solutions: the WaterGuard drainage system coupled with the TripleSafe Sump Pump. The WaterGuard is designed to capture water at the basement's perimeter, directing it away from the space, while the TripleSafe Sump Pump stands as the fortress against moisture - equipped not only to pump out water efficiently but also to kick things up a notch with a secondary pump in case of heavy rain.

Recently, we at Basement Systems USA had the opportunity to assist a homeowner in Baltimore, MD, who was dealing with a common yet frustrating issue. Every time it rained, they noticed water seeping in where the basement wall meets the floor—an alarming sign of potential water damage and discomfort in their unfinished basement, something no homeowner should have to deal with. Understanding the gravity of the situation, our first step was to send a System Design Specialist from our Sales Team to thoroughly inspect the basement. This home visit was crucial as it allowed us to diagnose the root of the problem and craft a personalized solution that would ensure the homeowners peace of mind during rainstorms. After completing a detailed inspection, we recommended installing our SuperSump and WaterGuard systems—a proven combo for preventing basement water issues. The SuperSump system is designed to efficiently pump out water entering the basement, whereas the WaterGuard serves as an interior perimeter drainage system, capturing any water before it gets a chance to flood the basement floor. 

Recently, we had the opportunity to assist a homeowner in Baltimore, MD, who reached out to us with a crucial concern regarding their beautiful finished basement. Despite having a functional sump pump, every time it rained, they were faced with the inconvenience of water finding its way inside. During the visit, our experienced System Design Specialist conducted a thorough debris-free inspection, diagnosing the root cause of the water intrusion. Our recommendation? The installation of our efficient WaterGuard system, designed to discreetly channel water away, ensuring the basement remains dry regardless of the weather conditions outside. Our skilled production team, comprising a knowledgeable foreman and our diligent installers, gracefully took on the task. 

A homeowner in Baltimore, MD, reached out to us after noticing something concerning in their unfinished basement. Their existing sump pump, which had always kicked on every 15 minutes, was now working overtime, activating every 8 minutes. Although everything seemed to be operating correctly, the homeowner feared that their current system might soon be overwhelmed, pondering the necessity for an additional pump to share the load. Recognizing their concerns, our team quickly sprang into action. Upon arrival, one of our knowledgeable System Design Specialists conducted a complete evaluation of the basement's condition. The diagnosis? A SuperSump installation would perfectly address the overactivity issue by efficiently managing the water, ensuring the basement stayed dry without overworking the existing system. Our production team, consisting of seasoned foremen and skilled installers, then executed the work with expert precision. Installing the SuperSump wasn’t just about putting in a new system; it was an assurance to the homeowner that their basement's integrity would no longer be in jeopardy of undue stress from water buildup. 

When a family in Baltimore, Maryland, found themselves wrestling with water intrusion in their unfinished basement—where the wall meets the floor—they reached out to us at Basement Systems USA for help. Understanding the stress and frustration water problems can cause, we were eager to assist. Our process kicked off with a homeowner reaching our Customer Care team, outlining their need, to which we promptly scheduled a home inspection. Our adept System Design Specialist was on the scene, meticulously inspecting the problem area, diagnosing the core issue, and custom-designing a sound solution for their basement woes. Recognizing the homeowners' need for a reliable and long-lasting solution, we suggested the installation of our WaterGuard system along with the TripleSafe Sump Pump. The WaterGuard system is ingeniously designed to intercept water at the perimeter of the basement and guide it invisibly and silently to the TripleSafe Sump Pump system. The TripleSafe Sump Pump is aptly named for its reliability, offering not one, not two, but three levels of protection against water. It renders the basement impenetrably dry, irrespective of the situation outside. 

Recently, we at Basement Systems USA tackled a challenging situation for a homeowner in Baltimore, MD, that many in the area could find familiar. This homeowner reached out to us after a series of storms left their basement under 2-3 inches of water at its deepest point. The water infiltrated from the driveway side, causing significant damage, including to the basement's floor and some of the drywall, which had to be removed. A reliable combination of our WaterGuard drainage system around the interior perimeter of the basement and the installation of a TripleSafe Sump Pump. 

Recently, we had the pleasure of working with a homeowner in Baltimore, MD, who was facing persistent basement water issues. The homeowner reached out to us at Basement Systems USA, seeking a long-term solution for their sump pump failure and outdated window wells, which exacerbated water entry into their basement. Understanding the critical nature of their situation, we knew we had to act swiftly and efficiently. Upon receiving their call, our Customer Care team immediately set up a home inspection appointment. One of our experienced System Design Specialists visited the home, conducting a thorough inspection to diagnose the root cause of the problem. After assessing the situation, the specialist recommended the installation of our premium WaterGuard interior drainage system and the state-of-the-art SaniDry Sedona dehumidifier. 

Recently, a homeowner in Baltimore, MD, reached out to us at Basement Systems USA due to a pesky issue that had been troubling them for some time. With the recent rain storms, they noticed that water was steadily seeping into their basement. Our System Design Specialist conducted a thorough inspection of the basement, diagnosing the critical areas that allowed water entry. The solution? Implementing our trusted WaterGuard and TripleSafe Sump Pump systems to sweep the water away. Our skilled installation team then came into the picture, bringing the recommended solution to life. The WaterGuard system was integrated into the basement, designed to channel unwanted water into the TripleSafe Sump Pump system, ultimately ensuring water was effectively pumped away from the home. 

Last month, a homeowner from Baltimore, MD, reached out to us due to a persistent problem in their beautiful, finished basement. Every time a heavy rain hit, they encountered water seeping through a wall adjoining their neighbor's house. Despite having waterproofing measures in place before finishing their basement, they couldn't escape the unwelcome trickles of water, particularly in their utility area, which distressingly spread into their meticulously finished space. Understanding the urgency and frustration tied to recurring water intrusion, especially in a space meant for comfort and joy, we wasted no time. Our recommendation? The installation of WaterGuard, a specially designed interior drainage system, is guaranteed to be an effective solution.

When a homeowner in Baltimore, MD faced a daunting problem with their basement flooding after every heavy rainfall, they turned to us at Basement Systems USA for a solution. Imagine having to empty your shop vac three times within 15 minutes after September rainfall, dealing with a constantly humid basement that led to a dehumidifier running 24/7, and having a sump pump installed by the previous homeowner with no seal and improper drainage – it's exhausting and frustrating. Understanding their need for a permanent fix, we sent our System Design Specialist to conduct a thorough inspection. The foundation of our approach is to not just offer a temporary fix but a reliable, long-lasting solution. The inspector discovered the faulty sump pump installation's contribution to the issue, alongside the obvious challenge of the water ingress and humidity. Our recommendation included the installation of our WaterGuard system to effectively channel water out of the basement, a TripleSafe Sump Pump that guarantees function even in the most severe weather, and our SaniDry Sedona unit crafted to ignore Baltimore's most persistent humidity.

This Baltimore basement had an outdoor drain that often became clogged, and was ultimately un-fixable. Our team instead installed our TripleSafe sump pump system in the basement, which was connected to a feed line.

This old home in Baltimore city had a fieldstone foundation which leaked everywhere.  We installed the WaterGuard basement waterproofing systems around the perimeter.  The system was connected to a SuperSump system which will automatically pump the water out of the house.  A WaterWatch alarm will monitor the pump and notify the homeowner if the pump fails.  We also installed the CleanSpace vapor barrier on the walls to reduce moisture transmission through the foundation.  Finally, we also installed the larger TrenchDrain in the stairwell with a new concrete stairwell pad. 

This commercial building had a basement that was remodeled in the 50's.  It leaked during almost every storm and the water had caused mold problems on the old wall sand flooring. 

Basement Systems USA, Inc. went in and removed the flooring and the old walls to remediate the mold.  Then we installed the WaterGuard waterpoofing system with SuperSump.  The discharge line for the SuperSump was tricky.  We had to break open the sidewalk and extend the pipe to the street so that there would not be any ice on the sidewalk in the winters.  

When the waterproofing was done, we replaced the walls with moisture resistant DryWall and waterproof flooring so that there was no chance old mold or water damage.  

This basement had lots of problems. There were structural problems plus water leaking issues and the customer also wanted to re-finish it. The first thing we did was install CarbonArmor on the foundation walls to guarantee that they would no continue to crack and bow.  Then we installed a SuperSump system with WaterGuard  to prevent water seepage.  Once the waterproofing and structural repairs were completed, we removed all the old paneling and installed the TBF EverLast wall system. TBF comes with a 50 year guarantee against water damage and mold growth.  Once the walls were up, we installed MillCreek waterproof flooring and an inorganic and mold resistant drop ceiling.  The job came out great, but more importantly, the right materials were used. This basement will not have mold and odor issues in a the future. 

This basement did not have a drainage system, but it did have an old sump pump and drain outside of the stair well that was not functional. We upgraded the sump pump with our SuperSump system, and installed our WaterGuard interior drainage system along the basement walls. This will guarantee that the water will direct from the drain system and into our sump pump for a safe and dry basement. After, we ripped out the old stairwell pad and drain, and replaced it with the correct size of our TrenchDrain. Another Job well done and another dry basement. 

A homeowner with a leaky basement and mold problem called us to help. We used our Spot Mold Treatment to rid the space of all signs of mold and then replaced the existing damaged walls with our TBF Everlast walls that are guaranteed to stay mold and moisture free. To keep the basement staying in great condition, we added more of our quality products. The SuperSump sump pump was installed to prevent water from getting into the home and the Cleanspace wall system, WaterGuard and DryTrak systems will be used to capture and send any leaking water to the drain as will the ThermalDry Wall System which improves the basement’s comfort and energy use. The homeowner is very happy with the improved and guaranteed dry basement.

This customer wanted to fix his leaking basement and ensure it stayed dry even in the winter months. Our foreman and his team installed many of our top products to achieve this goal. While the SuperSump sump pump will pump out all unwanted water from the basement, the TrenchDrain and WaterGuard waterproofing systems were installed to guarantee the space stays dry, capturing any water that gets through the cracks and sending it to the pump. We used our ThermalDry wall system to rid wall seepage and help control the humidity. In addition, we added the UltraSump III as a backup sump pump and the IceGuard sump pump discharge line system which will prevent the basement from flooding if the pipes freeze during the winter. With all of these quality products, the customer is now happy with his dry basement and is confident that it will stay that way.

A homeowner was in need of a waterproofing system in order to keep their basement dry. Sean and his crew installed our quality SuperSump sump pump system along with the TrenchDrain and WaterGuard XL systems that capture and prevent water leakage along the basement floor and walls with no risk of damage or clogging. The homeowner couldn't be happier that their basement will now remain dry no matter the weather.

A customer called us looking for a solution to keep their basement dry. To make this possible, Miguel and his crew installed WaterGuard XL and our ThermalDry wall system to capture and drain unwanted water from the walls and floor and into the perimeter drains. They also installed the WellDuct system to prevent flooding from window well leakage. Now, the customer has a more comfortable and energy efficient basement that is guaranteed to stay dry!