Crawl Space Repair Before & After Photos

This customer's crawlspace was wet, moldy and in dire need of attention. We started here by removing the old insulation and doing a full mold remediation. Nextt we added Silverglo insulated wall panels around the perimeter of the crawlspace. We then installed our Cleanspace drainage matting and Cleanspace liner which will provide a barrier against moisture and water intrusion. We also installed a Supersump sump pump system, this system come with a liner, a cast iron pump, a pump stand and an airtight lid with a built-in floor drain and WaterWatch alarm system. Lastly, we installed a Sanidry Sedona dehumidifier to check the humidity levels in check.

A wet crawlspace or basement is not something any homeowner wants to deal with when they move into their new home and with this knowledge, this customer knew, before they could put their home on the market, they would need to correct the issue of a leaky crawlspace.

After we sent our inspector Keith Miller to evaluate the crawlspace, he saw that the customer already had a working sump pump in play, but there was no way for the water that was getting into the crawlspace, to get over to the sump pump. Right away Keith knew the solution to this wet crawlspace was our CleanSpace Vapor Barrier and our Waterguard. The Cleanspace will direct any water intrusion down to the Waterguard which will then direct that water over to their current sump pump to be pumped out of the crawlspace.

This crawl space suffered from a severe moisture and humidity issue. Our specialist found many cases of mold within the space upon inspection. Our team encapsulated the crawl space with our CleanSpace vapor barrier system to solve these issues.

This customer had a very damp and humid crawlspace that was causing mold to grow and the current insulation to fall down. To start off this project we first removed all the old damp insulation and then treated the mold with our Mold-X2 treatment. Next we installed our SilverGlo insulation wall panels and sprayed our RimTight spray foam insulation. Following our insulation install we put down our CleanSpace Vapor Barrier, install a SmartPump with Smart Pipe and then we finish up the install with a SaniDry Sedona Dehumidifier. 

This customer was interested in fixing up her dirt floor crawlspace. The space was very humid and there were beginning signs of mold present. We started here by removing all the old insulation and treating the mold with Mold X2. Next, we installed our SmartPipe crawlspace drain system and connected it to a SmartSump pump system. These two systems work together to discharge any incoming water that would otherwise collect and flood the crawlspace. Next, we installed SilverGlo insulated wall panels and added spray foam to the rim joists to create a more energy-efficient space. Lastly, we installed our CleanSpace Liner and vent covers.